The Metro 3750 supports selective q-in-q (vlan mapping) in several ways. Note, its only supported on the two GigE ES ports. 1 to 1
2 to 2 2 to 2
3750 Metro configuration guide: http://www.cisco.com/en/US/docs/switches/metro/catalyst3750m/software/release/12.2_44_se/configuration/guide/swtunnel.html#wp1019888 Pavel Skovajsa wrote:
Hello all, I have more customers coming to my switch into one trunk port. One of those customers has decided to have more than one vlan, and have to do a dot1q for him. Is there a way to configure this: - if a frame comes to my trunk trunk port with tag 10-100, make a dot1q tunnel with some vlan number - any other vlan is transported normally..... Any idea how this could be done? It probably depends on the switch model, so feel free to recommend that too... Regards, Pavel _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
-- ======================================================= Clinton Work Airdrie, AB _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
