Sounds like you want EVC, unfortunately, this is only supported on
7600+ES20 at present (somebody correct me if other platforms support
this currently)
Dave.
Pavel Skovajsa wrote:
Hello all,
I have more customers coming to my switch into one trunk port. One of
those customers has decided to have more than one vlan, and have to do
a dot1q for him. Is there a way to configure this:
- if a frame comes to my trunk trunk port with tag 10-100, make a
dot1q tunnel with some vlan number
- any other vlan is transported normally.....
Any idea how this could be done? It probably depends on the switch
model, so feel free to recommend that too...
Regards,
Pavel
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
