Scott, although not specifically for the 2600 series, try the first
link when you search for "site:cisco.com multilink frame relay" on
Google.
According to the Feature Navigator, Frame Relay Multilink is supported
on the 2600s in the 12.2T which is the release the document at the
first link that Google returns is using, but you will need the the IP
Plus feature set.
Tim Donahue
Quoting Scott Granados <[EMAIL PROTECTED]>:
I've been googling and searching on the cisco site but many of the
documents point to broken links. I'm looking for pointers for
configuring (if possible) multilink frame relay on a 2600 series. We
want to terminate 2 Frame Relay T1's on a single 2600 series if
possible.
Any pointers would be appreciated.
Thank you
Scott
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
--
Tim Donahue
----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
