> I've been googling and searching on the cisco site but many > of the documents > point to broken links. I'm looking for pointers for configuring (if > possible) multilink frame relay on a 2600 series. We want to > terminate 2 > Frame Relay T1's on a single 2600 series if possible. > > Any pointers would be appreciated.
I got the config below from someone using Verizon / MCI 2 x FR T1 Eric version 12.3 ! interface MFR1 mtu 4470 no ip address no ip redirects no ip proxy-arp encapsulation frame-relay IETF no ip route-cache cef no ip mroute-cache load-interval 30 no arp frame-relay frame-relay multilink bid to gw frame-relay lmi-type ansi ! interface MFR1.500 point-to-point ip address 192.168.1.1 255.255.255.252 no ip redirects no ip proxy-arp no arp frame-relay no cdp enable frame-relay interface-dlci 500 IETF ! interface FastEthernet0/0 ip address 10.10.10.1 255.255.255.0 speed auto full-duplex ! interface Serial0/0 mtu 4470 bandwidth 1536 no ip address no ip redirects no ip proxy-arp encapsulation frame-relay MFR1 no arp frame-relay ! interface Serial0/1 mtu 4470 bandwidth 1536 no ip address no ip redirects no ip proxy-arp encapsulation frame-relay MFR1 no arp frame-relay ! ip http server ip classless ip route 0.0.0.0 0.0.0.0 MFR1.500 _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
