On Thu, 19 Jun 2008, Antonio Querubin wrote:
Those burst values appear to be far below the recommended values for most
cases. See the following:
http://www.cisco.com/en/US/docs/ios/12_2/qos/command/reference/qrfcmd8.html
In your case, if your target rate-limit is 10000000, then 1875000 and 3750000
are what you probably should be using for the burst.
Ugh, never mind - I didn't notice the previous message farther down...
Antonio Querubin
whois: AQ7-ARIN
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
