You need 12.3(14)T or later on 3640.
--
Tassos
Jared Gillis wrote on 2/7/2008 8:36 μμ:
Hi all,
I recently turned up a 3640 running 12.3 latest Enterprise code and
OSPF. Everything works as expected, except that the device will not send
an OSPF trap OSPF state changes on any of it's interfaces. I do receive
syslog messages for the OSPF state changes.
log-adjacency-changes is on in my OSPF config, and all the trap types
under "snmp-server enable traps" are active.
There is no "snmp-server enable traps ospf" command available.
I tried changing to 12.3 latest IP Plus code, with no change.
I'm about to try other code versions, possibly even some 12.2 code, but
I figure that there's got to be something new to 12.3 or the 3640 that
I'm missing.
Thanks in advance,
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
