Hi Ajay if auto-summary is enabled with classful network command, all spesfic routes will be summarized to class boundary so for the below example , only 10.0.0.0/8 will be advertised
best regards --Ibrahim On Mon, Jul 14, 2008 at 8:39 PM, Ajay Chenampara <[EMAIL PROTECTED]> wrote: > Hi, > I was reading the wendell-odom exam guide and have teh following doubt: > > When auto-summary is enabled in bgp and the network command has only a > classful network, what happens if the router has more specific routes? > > eg: > > ip routing table has routes to > 10.10.10.0/24, 10.20.0.0/16 > > router bgp 1 > network 10.0.0.0 > auto-summary > > what will the bgp table contain? > > will it just be the summary route ? > > > > > Message Posted at: > http://www.groupstudy.com/form/read.php?f=7&i=131926&t=131926 > -------------------------------------------------- > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
