Put a deny at the beginning of your access-list -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dan Letkeman Sent: Thursday, July 24, 2008 4:15 PM To: [email protected] Subject: [c-nsp] route-map local destination device
Hello, I have a router that is doing some route-map's for various destinations. On the fa0/0 port I have "ip policy route-map inet" and the route-map's are done like this route-map inet permit 10 match ip address 111 set ip next-hop 187.174.55.2 ! route-map inet permit 40 match ip address 222 set ip next-hop 187.174.55.2 ! route-map inet permit 50 match ip address 333 set ip next-hop 187.174.55.2 Ip access lists match various internal ip's or ip ranges. Now if have a device that is connected directly to the router with an ip of 10.1.1.1, but none of the internal devices can ping it because they are being route-map'd to different gateway's. Is there a way to bypass the route-map if it is a certain destination? Thanks, Dan. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ ######################################################### The information contained in this e-mail and subsequent attachments may be privileged, confidential and protected from disclosure. This transmission is intended for the sole use of the individual and entity to whom it is addressed. If you are not the intended recipient, any dissemination, distribution or copying is strictly prohibited. If you think that you have received this message in error, please e-mail the sender at the above e-mail address. ######################################################### _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
