On Thu, 2008-07-24 at 18:15 -0500, Dan Letkeman wrote: > route-map inet permit 10 > match ip address 111 > set ip next-hop 187.174.55.2 > ! <snip> > Ip access lists match various internal ip's or ip ranges. > > Now if have a device that is connected directly to the router with an > ip of 10.1.1.1, but none of the internal devices can ping it because > they are being route-map'd to different gateway's. Is there a way to > bypass the route-map if it is a certain destination?
Depending on your platform, you might also use "set ip default next-hop", to allow the router to do a route lookup and only use the policy routing if there is no specific route to the destination. (= only a default.) Regards, Peter _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
