Damn.
Are you absolutely sure there is no IOS upgrade for the existing switch
that can fix this?
Chris Phillips wrote:
Alex,
You don't get around it on the 2924. You will need to upgrade to the
2950G-24-EI.
They're not much more than the 2924.
Good luck.
Alex Balashov wrote:
For some reason, my Catalyst 2900 series (WS-C2924-XL) does not like
VLAN IDs higher than 1005:
sw01(config)#switchport trunk allowed vlan add 1202
Command rejected: Bad VLAN list - character #5 (EOL) delimits a VLAN
number (1202) out of the range 1 to 1005.
This is with a trunking interface:
interface FastEthernet0/1
duplex full
speed 100
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 1,3,100,1002-1005
switchport mode trunk
IOS is 12.0(5)WC8 (C2900XL-C3H2S-M).
I'm pretty sure this has already been asked a thousand times, but how
do I get around this issue so I can get support for the extended VLAN
IDs up to 4096?
--
Alex Balashov
Evariste Systems
Web : http://www.evaristesys.com/
Tel : (+1) (678) 954-0670
Direct : (+1) (678) 954-0671
Mobile : (+1) (706) 338-8599
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
