Just for the heck of it I Bundled all 28 once in a lab with a NPE400 on one end and a NPE300 on the other..
I was able to pull about 40mbps or so across the link.. if memory serves me correct the cpus spiked pretty high.. above 90% I think... I didn't do a whole lot of testing but it definitely took all 28 members... Brandon -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Daniel Lacey Sent: Wednesday, August 20, 2008 3:51 PM To: [email protected] Subject: [c-nsp] 7206 12.2(18) Maximum # of MLPPP T1s on PA-MC-T3 Hi all, cisco 7206VXR (NPE300) processor (revision B) with 229376K/65536K bytes of memory. R7000 CPU at 262Mhz, Implementation 39, Rev 1.0, 256KB L2 Cache 6 slot VXR midplane, Version 2.0 I found that the PA-MC-T3 card will handle 12 T1 links in one MLPPP group and still use HW. After 12, the 7206 will go into SW mode for the MLPPP bundle. How many T1s can I use, albeit in SW mode, can I bundle together? I know I can bundle across PA-MC-T3, again in SW mode, but how many total T1s can I bundle across two PA-MC-T3 cards? How about where I will run into performance issues? Thanks in advance! Dan _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
