On Tue, 26 Aug 2008, Marco d'Itri wrote:
Works for me on 12.2(18)SXE6b but all are eFlexwans:
Slot 4: Logical_index 9
2 port adapter Enhanced FlexWAN controller
Board is analyzed ipc ready
HW rev 0.1, board revision A01
Serial Number: Part number: 73-6348-01
Slot database information:
Flags: 0x2004 Insertion time: 0x22C08 (6w5d ago)
Controller Memory Size:
192 MBytes CPU Memory
63 MBytes Packet Memory
255 MBytes Total on Board SDRAM
IOS (tm) cwlc Software (cwpa2-DW-M), Version 12.2(18)SXE6b,
RELEASE SOFTWARE (fc2)
PA Bay 1 Information:
POS PA, 2 port, PA-POS-2OC3
EEPROM format version 4
HW rev 1.00, Board revision A0
Serial number: JAE09044GVG Part number: 73-8220-05
-Hank
When I plug in the PA I get this:
SLOT 5/0: 00:00:03: %PA-2-UNDEFIO: Unsupported I/O Controller (type 65535) in
I/O Bay. The I/O Controller network interfaces will be unavailable.
a normal fast ethernet PA works fine.
cisco.com says that the PA is supported even by non-enhanced FlexWANs.
IOS (tm) s72033_rp Software (s72033_rp-ADVENTERPRISEK9_WAN-M), Version
12.2(18)SXF13, RELEASE SOFTWARE (fc1)
--
ciao,
Marco
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
