PA-POS-OC3 has been supported in both FlexWANs since they FCS'd. Maybe
that particular PA has the idprom messed up. Try doing a sh diagbus with
it inserted and see what the PA idprom is telling the system.
bourke#sh diagbus
...
Slot 8: Logical_index 16
2 port adapter Enhanced FlexWAN controller
Board is analyzed ipc ready
HW rev 1.5, board revision A0
Serial Number: JABxxxxxx Part number: 73-8273-09
Slot database information:
Flags: 0x2004 Insertion time: 0x2CE0C (00:00:11 ago)
CWAN Controller Memory Size: Unknown
PA Bay 0 Information:
2CT3+ single wide PA, 2 ports
EEPROM format version 1
HW rev 1.00, Board revision A0
Serial number: xxxxxxxx Part number: 73-3388-03
Ian
Marco d'Itri wrote:
> When I plug in the PA I get this:
>
> SLOT 5/0: 00:00:03: %PA-2-UNDEFIO: Unsupported I/O Controller (type 65535) in
> I/O Bay. The I/O Controller network interfaces will be unavailable.
>
> a normal fast ethernet PA works fine.
> cisco.com says that the PA is supported even by non-enhanced FlexWANs.
>
> IOS (tm) s72033_rp Software (s72033_rp-ADVENTERPRISEK9_WAN-M), Version
> 12.2(18)SXF13, RELEASE SOFTWARE (fc1)
>
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
