>Remove the service policy from your ATM int's and just leave it on your >Dialer, then do a "sh users" and you should see an interface listed as the >MLP Bundle, this is the one you want to be watching, if for example it is >Vi4 then do a "sh policy-map int vi4"
I was following the advice at http://www.cisco.com/en/US/tech/tk543/tk544/technologies_tech_note09186a0080094ad2.shtml which states: ". When you use a combination of Class-based Marking or Class- based Policing and Class-based Queuing, the order of operations is this: 1. The service-policy command configured on the Virtual-Template interface marks or polices the packets. 2. The service-policy command on the ATM PVC queues the packets " Is this not correct? ------------------------------------------------ David Freedman Group Network Engineering Claranet Limited http://www.clara.net _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
