>Dialer will default to interface mtu of 1500 bytes unless you specify >something else.
Sorry, to clarify, the dialer sits on top of an ATM interface which has a 4470byte MTU, from the ATM over G.SHDSL to the DSLAM, LAC, LNS and NAS there is an oversized MTU as well (>2000), with the default dialer MTU of 1500 the maximum payload should leave at 1508B which is well below the MTU of all the network components end-to-end I dont believe this will cause any fragmentation? >Haven't really played with the QoS on 12.4.20T much yet, but if you look >back for the post with the subject [Improved queuing in 12.4(20)T?] from Per >Carlson you can ask him what he was using J >Let us all know if 12.4.20T does magic for you. I will try this, Thanks very much for your help, Dave. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
