Hi,
I'm trying to troubleshoot a strange case regarding an etherchannel (PAgP works, LACP doesn't) between a 6500
(SUP720/SXF14) and a 3750 (12.2(44)SE2), but i cannot see any debug logs on the 6500 after enabling "debug etherchannel
all". On the 3750 i get some messages after enabling the same debug, but i can also use "debug pagp/lacp" which displays
a lot more (and most of them are quite helpful).
Is the "debug etherchannel all" supposed to display anything? If not, is there another debug command on the 6500 like
the "debug pagp/lacp" on the 3750?
--
Tassos
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
