I don't think you can put an RSP720 in a 6500 chassis. There is the VS 720 with the 3CXL PFC, but that is about $8K more. I don't think you can get the 3CXL in a 6500 without getting the 10gig ports.
Chuck -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Christian Bering Sent: Wednesday, September 03, 2008 3:53 PM To: Peter Rathlev Cc: [email protected] Subject: Re: [c-nsp] Dreaded FIB Exception on Sup2 Hi, >>Yes. For a full table you need to upgrade to an RSP720-3CXL. >And even the SUP720 can manage too, as long as it has the >magic "XL" in the end. :-) Yeah but since the list price for the RSP720-3CXL is the same as the list price for the SUP720-3BXL, I don't see a reason not to go for the RSP. Does one exist? -- Regards Christian Bering _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
