Hey all, Quick QoS question here. I seem to be having some trouble getting a policy applied to a Serial (T1) interface, and for the life of me don’t understand why. I’m pretty sure it’s my fault and not a “feature”.
Error I am getting when I try to apply the service policy direction output: %INTERFACE_NAME% class Data-DSCP requested bandwidth 750 (kbps) Available only 656 (kbps) Here are the class/policy map statements: class-map match-any Control-DSCP match ip dscp cs3 match ip dscp af31 class-map match-any Voice-DSCP match ip dscp ef class-map match-any Video-DSCP match ip dscp af41 class-map match-any class-default class-map match-any Data-DSCP match ip dscp default policy-map QoS-Policy-Office class Voice-DSCP priority 360 class Video-DSCP bandwidth 128 class Control-DSCP bandwidth 8 class Data-DSCP bandwidth 750 class class-default If I bump bandwidth of class Data-DSCP down to 656 from 750, it applies with no backtalk. Clearly I am missing something on a conceptual level, here. Any help is appreciated. ☺ Platform: 7206VXR, NPE-G1 running 12.3(26) SP code. Thanks! -Ryan _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
