On Thu, September 4, 2008 12:42 pm, Mike Louis wrote: > I usually set the max reserve command to 95 percent to leave room for > routing and other overhead. That way I don't have to specify a specific > class to take care of it if I reserve akll remaining bw in the pm
Be careful, this *doesn't* guarantee that remaining 5% is reserved for management / routing, unless you explicitly police all the other classes. It stops you *reserving* it for other classes, but it doesn't stop those other classes *using* it. Much safer, IMO, to put a class (or classes) in for management / routing, and then let the bandwidth reserved for these go back into the pool while it's not being used. Regards, Tim. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
