Not a PA. There are SPA's but this would mean 7600/ASR/12k -- http://dcp.dcptech.com
> -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of David Aldworth > Sent: Thursday, September 18, 2008 3:07 PM > To: Justin M. Streiner > Cc: [email protected] > Subject: Re: [c-nsp] PA-POS-1OC3 vs. PA-A3-OC3SMI > > Hmm. Okay, so the PA-MC-T3 breaks the DS3 down to individual DS1's > (T1's). Is there nothing equivalent at the OC3 level? > > David > > On Sep 18, 2008, at 12:58 PM, Justin M. Streiner wrote: > > > On Thu, 18 Sep 2008, David Aldworth wrote: > > > >> We are looking for a fully channelized OC3 interface for a Cisco > >> 7200 VXR. Something that we can break individual T1's off of. In > >> researching this there are two routes: PA-POS-1OC3 or > PA-A3-OC3SMI. > >> The first is SONET and the second is ATM. > >> > >> Other than price what is the difference? Which is needed? > > > > I don't believe either interface supports anything other than > > concatenated operation, i.e. a full 155 Mb/s interface; you can't > > break the OC3 into its component STS slots to break out DS3, CT3, > > T1, etc... > > > > Also, the interface you'd buy would be determined by the transport > > type. A POS OC3 interface might be able to physicall > terminate a ATM > > OC3, but it won't be able do any of the ATM stuff. > > > > jms > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
