On Thu, Sep 18, 2008 at 01:07:20PM -0600, David Aldworth wrote: > Hmm. Okay, so the PA-MC-T3 breaks the DS3 down to individual DS1's > (T1's). Is there nothing equivalent at the OC3 level?
The PA-MC-STM-1 does it for stm-1 and E1 circuits. not sure if there is an OC3 version > > David > > On Sep 18, 2008, at 12:58 PM, Justin M. Streiner wrote: > > >On Thu, 18 Sep 2008, David Aldworth wrote: > > > >>We are looking for a fully channelized OC3 interface for a Cisco > >>7200 VXR. Something that we can break individual T1's off of. In > >>researching this there are two routes: PA-POS-1OC3 or PA-A3-OC3SMI. > >>The first is SONET and the second is ATM. > >> > >>Other than price what is the difference? Which is needed? > > > >I don't believe either interface supports anything other than > >concatenated operation, i.e. a full 155 Mb/s interface; you can't > >break the OC3 into its component STS slots to break out DS3, CT3, > >T1, etc... > > > >Also, the interface you'd buy would be determined by the transport > >type. A POS OC3 interface might be able to physicall terminate a ATM > >OC3, but it won't be able do any of the ATM stuff. > > > >jms > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > -- Colin Whittaker +353 (0)86 8211 965 http://colin.netech.ie [EMAIL PROTECTED] _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
