On Sat, Sep 20, 2008 at 04:08:04PM -0400, Paul wrote: > I'm getting the following messages when inserting a WS-X6704-10GE module > into a 6509 > running 12.2.18 SXF2 sup720-3bxl > > 00:00:04: %SYS-CFC9-5-RESTART: System restarted -- > Cisco Internetwork Operating System Software > IOS (tm) c6lc2 Software (c6lc2-SP-M), Version 12.2(18)SXF2, RELEASE > SOFTWARE (fc1) > Technical Support: http://www.cisco.com/techsupport > Copyright (c) 1986-2006 by cisco Systems, Inc. > Compiled Thu 19-Jan-06 04:37 by dchih > *Nov 30 00:00:02.723: CFC9: Currently running ROMMON from S (Gold) region > - RELIABILITY DRIVER: wrong signature on NVFLASH
A co-worker reported the same message to me on Friday from a lab switch running SXD7b when he inserted a 6704-10GE w/dfc3bxl. Do you have redundant sups in the switch? This message is in our logs: 00:00:24: %SYS-DFC4-5-RESTART: System restarted -- Cisco Internetwork Operating System Software IOS (tm) c6lc2 Software (c6lc2-SP-M), Version 12.2(18)SXD7b, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2006 by cisco Systems, Inc. Compiled Fri 08-Dec-06 12:34 by ccai 00:00:24: DFC4: Currently running ROMMON from S (Gold) region - RELIABILITY DRIVER: wrong signature on NVFLASH 00:18:40: SP: Disabling standby fabric in slot 6 and allowing module in slot 4 to go ONLINE as it's fabric channels could not sync with the standby but synced with the active fabric 00:18:40: %OIR-SP-3-PWRCYCLE: Card in module 6, is being power-cycled off (Fabric channel errors) 00:18:42: %PFREDUN-SP-6-ACTIVE: Standby processor removed or reloaded, changing to Simplex mode 00:18:43: %DIAG-SP-6-RUN_MINIMUM: Module 4: Running Minimum Diagnostics... 00:18:54: %DIAG-SP-6-DIAG_OK: Module 4: Passed Online Diagnostics > Sep 20 13:19:21: %PM_SCP-SP-2-LCP_FW_ERR_INFORM: Module 9 is > experiencing the following error: Port Asic 0: 2 important event > > Sep 20 14:02:51: %PM_SCP-SP-2-LCP_FW_ERR_INFORM: Module 9 is > experiencing the following error: Port Asic 0: 1 important event I don't see any instances of this, so it could be different. > Is this a bug in SXF2? I put the same module into another running SXH3 > and I don't get the reliability driver message. > Also this ASIC message does not look good but again it doesn't happen on > SXH3.. > > Thanks > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ -- Ross Vandegrift [EMAIL PROTECTED] "The good Christian should beware of mathematicians, and all those who make empty prophecies. The danger already exists that the mathematicians have made a covenant with the devil to darken the spirit and to confine man in the bonds of Hell." --St. Augustine, De Genesi ad Litteram, Book II, xviii, 37 _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
