I presume the only difference in setting up vlans would show in CatOS which I haven't used and not sure people do today compared to IOS.
If I remember correctly through my Cisco training CatOS is something like set vlan %x while as it should be straight forward with IOS using vlan %x in global config. I do however remember a mishap I used to do sometimes. I used to create virtual interfaces e.g Vlan401 and they wouldnt work for the simple fact that I didnt create the l2 vlan. Trunking should be fairly straight forward too. Int X/X/X switchport mode trunk switchport encap dot1q no shut thats about it. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
