Jason Koh wrote:
Hi there
I have a strange problem with a pair of cat6509s. Both are connected to each
other via OSPF and IBGP, with EBGP with my upstream providers.
Whenever I use show running-config, it will pause for an extremely long time
after the line "Building Configuration". It happens from either console or
telnet sessions. At first I thought it was a CPU or memory problem, but
"show proc cpu" and "show proc mem" shows nothing out of the ordinary (cpu
less than 20% and memory with more than 256M free). Rebooting both machines
doesn't solve the problem either.
After further investigations, I found out that the same problem occurs when
I do the following as well.
1) copy running-config startup-config
2) write memory
Show startup-config does not have this problem.
Some questions:
1. How long is "extremely long"
2. How big (in lines and in bytes) is your startup config
3. Which SUP, IOS version and linecards are you using
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
