The way to do it is to check the MAC address learned on that port (show mac-address), and then use the "show ip arp" command using that MAC address on the 1st layer 3 hop (the router which used as L3 default gateway for that VLAN.
Arie -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of kcc Sent: Thursday, October 09, 2008 19:59 PM To: [email protected] Subject: [c-nsp] command or third party software about switch port Hi all ls any software / command to find out the ip address of the computer which is connecting to switch portxx I want to check this ip of server when the switch portxx is using high bandwidth? thanks _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
