Solarwinds packages this up, nice and pretty, with it's "Switch Port Mapper". You don't want to know how much that costs ... But if you already own the Engineer's toolset, go for it.
>>> "Arie Vayner (avayner)" <[EMAIL PROTECTED]> 10/09/08 01:34PM >>> The way to do it is to check the MAC address learned on that port (show mac-address), and then use the "show ip arp" command using that MAC address on the 1st layer 3 hop (the router which used as L3 default gateway for that VLAN. Arie -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of kcc Sent: Thursday, October 09, 2008 19:59 PM To: [email protected] Subject: [c-nsp] command or third party software about switch port Hi all ls any software / command to find out the ip address of the computer which is connecting to switch portxx I want to check this ip of server when the switch portxx is using high bandwidth? thanks _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
