Robert Gutierrez wrote:
Hi all. I have a typical BGP loopback setup to my ISP. 4 links across 2
routers. 2 links on each router. Easy -- no problemo.
Now, how can I get loopback address redundancy? I'm currently using
Router "A" as my loopback address, with an iBGP to Router "B", and
multihop and maximum-paths set up. So Router "A" knows about all 4 links
outbound.
Now, if I lose Router "A" (crash, power-off, etc), I want Router "B" to
pick up the peering of it's 2 links, and bring the BGP session back up.
The only way that I can figure out is (1) Make the loopback address an
HSRP across both routers (is that even possible or been done?), or (2)
Just bring up sessions on both routers using the same Loopback address.
You don't really want to do this. It'd only cause your links to flap a
second time when the router came back up.
What are the links? Ethernet? Serial? If you're taking ethernet from the
provider, why not just use switches so that both routers can talk across
all of the links? It would mean 8 sessions though.
I guess the "right" way is to use 2 different loopback addresses, one for
each router, and bring up peers for both, and use MEDs or their community
map to make them pref one way or another across each loopback peer (with
myself using local-pref). Do you know of any Tier-1's that let you do
this?
adam.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
