That's a great Cisco doc, thanks. I haven't been able to find anything on Google, but we are having issues with static IP configuration with the new Actiontec M1000 modem firmware (v2.) I can assign static IP addresses to the modem via radius, but cannot with the IP unnumbered mode feature in the Actiontec CPE. I figured I'd give the newer IOS a try before I start debugging PPP or radius.
Thanks. -----Original Message----- From: Rinse Kloek [mailto:[EMAIL PROTECTED] Sent: Thursday, November 06, 2008 1:14 PM To: Roddy Strachan Cc: Ruben Alvarez; Cisco-nsp Subject: Re: [c-nsp] Cisco IOS for broadband aggregation What kind of features do you use with the 7206VXR box ? We are also looking to upgrade to 12.2.31SB13 because we have some problems with 12.2(31)SB6. regards Rinse Roddy Strachan schreef: > Ruben, > > Funny you mention it. > > I've just finished an upgrade of a mixture of 7301 and 7206vxr to > 12.2(31)SB13. > > Had a 7301 running in production for 1 week, no issues, the LNS seems a lot > more stable if you ask me. > > Don't know how the 7206 will go as they have been in production less than an > hour :). > > So far so good, no real issues to report. > > > > On 7/11/08 8:03 AM, "Ruben Alvarez" <[EMAIL PROTECTED]> wrote: > > >> Hi All, >> >> I'm upgrading IOS on my c7206VXR with an npe-300 and: >> UBR7200-I/O-2FE/E >> PA-A3-T3= >> PA-IMA-T1= >> PA-4E= >> I'm currently using 122-28.SB2 and noticed a 122-31.SB. Is anyone using the >> 12.2(31)SB instead of the 12.2(28)SB? I've been looking online and haven't >> seen much about it. I assume it's got the same features as (28)? If anyone >> has any feedback let me know. >> >> Thanks. >> >> > > > This email and any files transmitted with it are confidential and intended > solely for the use of the individual or entity to whom they are addressed. > Please notify the sender immediately by email if you have received this > email by mistake and delete this email from your system. Please note that > any views or opinions presented in this email are solely those of the > author and do not necessarily represent those of the organisation. > Finally, the recipient should check this email and any attachments for > the presence of viruses. The organisation accepts no liability for any > damage caused by any virus transmitted by this email. > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
