Hi, be careful with your NPE-300, which has already reached End-of-everything and is not supported with 12.2SB train. As far as I know the last supported S-based train for NPE-300 is 12.2S. You might notice the warning message at bootup of the router or if issuing of show version command.
Ivan On Thursday 06 November 2008, Ruben Alvarez wrote: > Hi All, > > I'm upgrading IOS on my c7206VXR with an npe-300 and: > UBR7200-I/O-2FE/E > PA-A3-T3= > PA-IMA-T1= > PA-4E= > I'm currently using 122-28.SB2 and noticed a 122-31.SB. Is anyone > using the 12.2(31)SB instead of the 12.2(28)SB? I've been looking > online and haven't seen much about it. I assume it's got the same > features as (28)? If anyone has any feedback let me know. > > Thanks. > > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
