Cisco VPN concentrator 3000 Windows IAS 2000
I am trying to set up a RADIUS server for VPN users but I am having issues because I think I do not have a good grasp on how ithe authentication/authorization works from the COncentrator to the IAS server My goal is to configure the remote group to connect to the VPN, then authenticate thru the RADIUS server connect to the Active directory and in AD I can control the permissions and security in our network I followed the steps here: http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_example09186a0080094700.shtml and the IAS will reject it. (Event ID 2 in Event Viewer, Source IAS) I also went to configuration-System-Servers- Authentication and test it from there and I get the message: "Authentication Rejected: Unespecified" I also found this link: http://www.ciscosystems.com/en/US/docs/security/vpn3000/vpn3000_47/configuration/guide/ldapapp.html But I think that it does not apply to my case since I am configuring the groups as "Internal" If you could shed some light it would be very appreciated Thanks John _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
