Then you're looking at RAD's IPmux-14: http://www.ethernetaccess.com/Article/0,6583,36596-TDM_Pseudowire_Access_Gat eway,00.html
I'm sure there are other TDM over Ethernet products, but this is the one that most readily comes to mind. Frank From: Felix Nkansah [mailto:[EMAIL PROTECTED] Sent: Saturday, November 22, 2008 2:39 PM To: [EMAIL PROTECTED] Cc: [email protected] Subject: Re: [c-nsp] E1 to Fiber POP Device? Hi Frank, I am looking at Ethernet on the Fiber portion. Felix On Sat, Nov 22, 2008 at 7:13 PM, Frank Bulk <[EMAIL PROTECTED]> wrote: Are you looking to do E1 over Ethernet, or mux them into DS-3/OC-3? It's not clear what L2 you are going to do over the fiber. Frank -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Felix Nkansah Sent: Saturday, November 22, 2008 11:04 AM To: [email protected] Subject: [c-nsp] E1 to Fiber POP Device? Hi, A network design I am working on would aggregate/terminate E1 connections at various sites or POPs and transfer the traffic over a fiber WAN. I am trying to figure out a device that would do a good job in taking incoming E1s and outgoing fiber. It appears to me that the Cisco AS5400XM appliance does not have support for fiber connections. I should be glad if any of you could recommend some Cisco product(s) for accomplishing this task. Many Thanks, Felix _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
