You made a small configuration mistake. > Enter configuration commands, one per line. End with CNTL/Z. > JID_CORE_Router(config)#policy-map CMS > JID_CORE_Route(config-pmap-c)#shape average 1000000 > JID_CORE_Route(config-pmap-c)# > > It takes the command just fine.
You need to aply shape command under the class, not under the policy-map: policy-map CMS class CMS shape average ... ! ! Note that shape uses Kb/s and not b/s. However, you may find that this may not work on an ATM interface. -- Marko CCIE #18427 (SP) My network blog: http://cisco.markom.info/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
