On Mon, Nov 24, 2008 at 10:48 PM, Marko Milivojevic <[EMAIL PROTECTED]>wrote:
> You made a small configuration mistake. > > > Enter configuration commands, one per line. End with CNTL/Z. > > JID_CORE_Router(config)#policy-map CMS > > JID_CORE_Route(config-pmap-c)#shape average 1000000 > > JID_CORE_Route(config-pmap-c)# > > > > It takes the command just fine. > > You need to aply shape command under the class, not under the policy-map: > > policy-map CMS > class CMS > shape average ... Thanks, I should of mentioned I tried that and it did not work. > > ! > ! Note that shape uses Kb/s and not b/s. > > However, you may find that this may not work on an ATM interface. > > Correct, it does not. I am finding using the bandwidth command and WRED is working well. I raised the interface limits to 90% available bandwidth. Thanks to all who responded, -- James H. Edwards Senior Network Systems Administrator Judicial Information Division [EMAIL PROTECTED] _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
