Hi
In an IP-VPN test, I need to add a static default route pointing to CE1 from
PE1. This would I assume be redistributed to other PE's, then CE routers as
'redistribute static' is enabled on the PE config for this customer however
this seems not to be the case.
In fact PE2 never even sees that particular static route, even though it can
see other redistributed static routes that I put in just to check. Is there
some extra config needed on PE1 in order for the 0/0 static route to be
advertised to other PE's and therefore CE's such as default-originate as per
standard BGP?
Regards
Mark
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
