Maybe someone could point me in the right direction ... I'm doing some redundancy testing in the lab ...
I basically have two 3750's linked together redundantly via OSPF. IP CEF is enabled. Both switches are running 12.2(25)SEE2. Switch B is receiving redundant default routes from switch A. According to "sh ip cef exact-route" issued on switch B, traffic from <src1B> to <dest1A> and from <src2B> to <dest2A> should be all be travelling over a single link, leaving the other one empty of traffic. However, what I am actually seeing is that traffic from <src1B> to <dest1A> is flowing over one link, and from <src2B> to <dest2A> is travelling over the other. "sh ip cef detail" confirms that per-destination load balancing should be occurring, and when I run a single stream of traffic, indeed round-robin per-packet load-sharing is not occurring. Why would the traffic be following a different path than what the "sh ip cef exact-route" command suggests it should? Maybe I need to provide more detail for anyone to be able to opine ... Thanks, adam _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
