Hi, On Thu, Jan 08, 2009 at 04:48:37PM +0530, Hitesh Vinzoda wrote: > Can vlan 1 pass through routed ports.... between layer 3 switches. ..??
By definition a VLAN (which is a L2 thing) can't pass through routed ports.
If you need that, you need to setup some sort of bridging-over-L3, either
with EoMPLS or L2TPv3.
gert
--
USENET is *not* the non-clickable part of WWW!
//www.muc.de/~gert/
Gert Doering - Munich, Germany [email protected]
fax: +49-89-35655025 [email protected]
pgpHFmYsd1WpS.pgp
Description: PGP signature
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
