Hi, On Thu, Jan 08, 2009 at 07:16:19PM +0530, Hitesh Vinzoda wrote: > I m havin old setup of two 6509 connected together by means of routed ports. > On one of the 6509 i have vlan 1 with user subnet configured on it along > with DHCP. now when i connect anything on vlan 1 on 2nd 6509, the desktop is > leased with the IP of vlan 1 configured on 6509-1. any idea why i m gettin > ip leased through DHCP. > > note: no helper commands are used on vlan 1 of 6509-2 and no ip address > exists on SVI vlan 1.
Could be a trunk port between those 6509s.
Check with "show mac-address vlan 1" or "show spanning-tree vlan 1" on
which ports vlan 1 is active where it shouldn't be.
gert
--
USENET is *not* the non-clickable part of WWW!
//www.muc.de/~gert/
Gert Doering - Munich, Germany [email protected]
fax: +49-89-35655025 [email protected]
pgpCDs4ebSG4y.pgp
Description: PGP signature
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
