Skeeve Stevens wrote:
Speaking on VRF-Lite.
What is the easiest way to link two VRF's on two separate routers in layer 2
- so each VRF can see the arp and so on from the other?
i think you've missed a critical bit of understanding here; VRF is a
layer 3 concept.
if you wanted to connect two routers together at L2 and push multiple
VRFs between them, assuming its ethernet between those two routers,
logically you'd use 802.1Q VLAN trunking.
cheers,
lincoln.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
