Don't have a link handy, but here is a sample of the config we use. You can view status using
show ppp multilink interface Multilink1 description Multiplexed Logical Connection to remote site ip address 1.1.1.1 255.255.255.0 ip access-group inbound in ip access-group outbound out ip verify unicast source reachable-via rx no ip redirects no ip unreachables no ip proxy-arp no peer neighbor-route fair-queue 1024 256 0 ppp multilink ppp multilink fragment disable ppp multilink group 1 interface Serial1/0/19:0 description Connected to remote site (circuit 1) no ip address no ip redirects no ip unreachables no ip proxy-arp encapsulation ppp no fair-queue ppp multilink ppp multilink group 1 interface Serial1/0/21:0 description Connected to remote site (circuit 2) no ip address no ip redirects no ip unreachables no ip proxy-arp encapsulation ppp no fair-queue ppp multilink ppp multilink group 1 Sincerely, Michael Malitsky > Message: 8 > Date: Thu, 15 Jan 2009 16:55:48 +0000 > From: William <[email protected]> > Subject: Re: [c-nsp] Per packet load balancing with low latency > applications > To: "[email protected]" <[email protected]> > Message-ID: > <[email protected]> > Content-Type: text/plain; charset=ISO-8859-1 > > Can anyone point me to some decent documentation on setting up MLPPP > with serial links? Google/Cisco.com is not liking my key words today. > > Thanks for your time. > > W > > 2009/1/15 <[email protected]>: > > Hi, > >> Yes, age old question. > >> > >> Use layer 2 technologies such as MLPPP. > > > > yep - you caan then choose the appropriate load balancing > > method so media streams for the same target go down them same pipe. > > missing packets are generally okay for most modern streaming > > systems...they ignore them..you might get a little glitch if you > > are unlucky....but packets arriving out of order? ouch. > > > > alan > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
