Alex, all Thanks for that. Someone else suggested something similar offlist.
For the record, the following worked:
+-------+-----------------+-------------------+----+------------------------------------------------+
| id | UserName | Attribute | op | Value
|
+-------+-----------------+-------------------+----+------------------------------------------------+
| 56850 | [email protected] | Cisco-AVpair | = | lcp:interface-config=no
ip wccp 97 redirect in |
+-------+-----------------+-------------------+----+------------------------------------------------+
- Barry
On Tuesday 20 January 2009 18:44:10 [email protected] wrote:
> Hi Barry,
>
> > 2) have RADIUS specify an attribute that can add the 'ip wccp 97 redirect
> > in' statement dynamically.
>
> i think following Reply-Item should work to
>
> Attribut: Cisco-AVPair
> Value: lcp:no ip wccp 97 redirect in
>
> So you can disable wccp for selected users.
> If you prefer the to enable it for different users, you have to remove
> "ip wccp 97 redirect in" from virtual-template1 and use this Reply-Item:
>
> Attribut: Cisco-AVPair
> Value: lcp:ip wccp 97 redirect in
>
> I couldn't test i by myself, because we don't use wccp-feature....
>
> Regards,
> Alex Detzen
>
> _______________________________________________
> cisco-nsp mailing list [email protected]
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
