Hello, Could somebody help me on issue below? Call comes into an E1 R2 line on a Cisco AS5400 and gets sent via H323 to an endpoint. The endpoint send alerting messages and the Cisco AS5400 send to TX ANSWERED on CAS leg . I am charging this call on alerting. How can i prevent this? The cut-through :both direction is activated by voice rtp send-recv. Also i tried to deactivate early cut-through by command below. sip-ua disable-early-media 180
I tried also to play with progress_ind on VOIP Dial-peer but it same situation. I charge this call on alert phase. Juli _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
