Hello all I am trying to perform some tests where a Cisco router takes up the role of a LAC, forwarding PPP calls to the appropriate LNS according to the domain name provided by the user. At the same time this LAC must be able to localy terminate PPP sessions offering internet services to subscribers. I have used a fairly simple config like the
aaa group server radius SUBS server a.b.c.d auth-port 1812 acct-port 1813 throttle accounting 150 load-balance method least-outstanding ! aaa authentication ppp SUBS group SUBS aaa authorization network SUBS aaa accounting network SUBS action-type start-stop aaa accounting network default none vpdn-group <l2tp-domain> request-dialin protocol l2tp domain <l2tp-domain> initiate-to ip x.x.x.x source-ip y.y.y.y local name LAC l2tp tunnel password 0 cisco bba-group pppoe PPPOE virtual-template 10 interface Virtual-Template10 ip unnumbered Loopback0 peer default ip address pool PPP_POOL_1 ppp authentication pap SUBS ppp authorization SUBS ppp accounting SUBS The problem is that for the users that are localy terminated we need radius accounting. On the other hand no accounting is required for the L2TP forwarded users. Still the router generated accounting Start / Stop messages for these VPDN users creating extra load for the radius server. Is there a way to differentiate the accounting between VPDN and localy terminated subscribers? Specificaly disable accounting for L2TP fordwarded users and at the same time use radius accounting for localy terminated subscribers. Any help is welcomed _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
