Hello Arie I have tried this command but without luck. The "vpdn tunnel accounting network" seems to controll the generation of accounting Tunnel-Start/Tunnel-Stop and Tunnel-Reject (codes 9, 10, 11) accounting type messages, not the Start and Stop (code 1 and 2).
So when vpdn tunnel accounting network is enabled using radius, the LAC generates Tunnel-Start/Tunnel-Stop in addition to Start and Stop accounting messages. If vpdn tunnel accounting network is configured to null, Tunnel-Start and Tunnel-Stop are indeed suppressed but Start and Stop are still generated by the LAC. I was wondering (and trying - without success) if using the sss - subscriber-profile commands would help me Thanx for your help Victor. On Sat, Jan 24, 2009 at 9:49 PM, Arie Vayner (avayner) <[email protected]> wrote: > Victor, > > Try looking at this command:"vpdn tunnel accounting network" > http://www.cisco.com/en/US/docs/ios/vpdn/command/reference/vpd_v1.html#w > p1013076 > > Arie > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Victor Lyapunov > Sent: Saturday, January 24, 2009 11:00 > To: [email protected] > Subject: [c-nsp] LAC - Disable Accounting messages just for L2TP users > > Hello all > > I am trying to perform some tests where a Cisco router takes up the > role of a LAC, forwarding PPP calls > to the appropriate LNS according to the domain name provided by the > user. > At the same time this LAC must be able to localy terminate PPP > sessions offering internet services to > subscribers. I have used a fairly simple config like the > > aaa group server radius SUBS > server a.b.c.d auth-port 1812 acct-port 1813 > throttle accounting 150 > load-balance method least-outstanding > ! > aaa authentication ppp SUBS group SUBS > aaa authorization network SUBS > aaa accounting network SUBS > action-type start-stop > aaa accounting network default none > > vpdn-group <l2tp-domain> > request-dialin > protocol l2tp > domain <l2tp-domain> > initiate-to ip x.x.x.x > source-ip y.y.y.y > local name LAC > l2tp tunnel password 0 cisco > > bba-group pppoe PPPOE > virtual-template 10 > > interface Virtual-Template10 > ip unnumbered Loopback0 > peer default ip address pool PPP_POOL_1 > ppp authentication pap SUBS > ppp authorization SUBS > ppp accounting SUBS > > > The problem is that for the users that are localy terminated we need > radius accounting. On the other hand > no accounting is required for the L2TP forwarded users. Still the > router generated accounting Start / Stop > messages for these VPDN users creating extra load for the radius server. > > Is there a way to differentiate the accounting between VPDN and localy > terminated subscribers? Specificaly disable > accounting for L2TP fordwarded users and at the same time use radius > accounting for localy terminated subscribers. > > Any help is welcomed > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
