On Wed, 2009-01-28 at 09:14 -0800, Michael K. Smith - Adhost wrote: > Just to confirm - you don't have an aggregate summary anywhere?
Nope, very simple configuration, a single eBGP neighbor and a single route statement: R1#sh run | begin ^router bgp router bgp 65112 <snip> address-family ipv4 vrf A neighbor 10.238.43.213 remote-as XXX neighbor 10.238.43.213 activate no synchronization network 10.32.176.0 mask 255.255.248.0 network 10.32.194.0 mask 255.255.255.0 exit-address-family ! <snip> I had the chance to do some more debugging, and shutting/unshutting the SVI with the 10.32.176.0/24 net made the problem disappear. Strange, but it was solvable. :-) Now we've defined it how we wanted it originally, with an aggregate covering the eight /24 prefixes. Regards, Peter _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
