Hi, We had a similar problem on a 7609 box, when we upgraded from SRB2 to SRC.After 3 un-planned reloads, each after 24 hour interval, we found that root cause was Netflow, and TCAM utilization used to reach 99%. So syslog errors may indicate something in yor case as well.
-- Regards, M Usman Ashraf On Thu, Jan 29, 2009 at 4:41 PM, Phil Mayers <[email protected]>wrote: > Mel Van Aswegen wrote: > >> Hi Everyone, >> >> Please Help! >> >> I have a major issue with a 7613 Router, it just reboots by itself, it >> happend last Friday and it happend at 11:00 this morning, i dont find >> anything on the web that indicates what could cause it. >> I have a feeling it is caused be the IOS. They IOS currently running on >> the >> router is 12.2(33)SRD >> >> Any help would be appreciated. >> >> > You definitely want to open a TAC case. > > Have a look on bootflash: and sup-bootflash: for some crashinfo-* files - > if present, TAC will want them and a quick page through them might show the > immediate cause of the crash. > > Have any major changes taken place to the traffic patterns or config of the > router? > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
