On Fri, Jan 30, 2009 at 12:36 AM, Gert Doering <[email protected]> wrote:
> Hi, > > On Wed, Jan 28, 2009 at 12:54:46PM -0800, Marlon Duksa wrote: > > Got it. Thanks much. One more question. Can 7600 line cards (ES20, > RSPs...) > > be reused in cat6500 chassis with the proper IOS (12.2(33).SRD). In other > > words can 6500 chassis be converted into 7600 and vice versa? > > No. > > > If not, do you know why? The chassis look exactly the same. > > Internal Cisco politics. Read up all the details in the archives of this > list. And complain to your Cisco account team (should you have one). > But politics aside, would you get an error message by trying to install 7600 based LCs into 6500 with 7600 based IOS saying that you need another chassis? Is there anything in the chassis itself (some chassis id stored in the eprom or something) that would prevent you from doing this or is it just a 'verbal' warning from Cisco reps saying that you can't do that? Marlon > > gert > -- > USENET is *not* the non-clickable part of WWW! > // > www.muc.de/~gert/ > Gert Doering - Munich, Germany > [email protected] > fax: +49-89-35655025 > [email protected] > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
