Most recent IOS (last 2-3 years) support for sure the option to put everything on the fly on one line, for example:
ping 1.1.1.1 source loopback0 repeat 1000 size 512 timeout 2 validate df-bit etc, etc... A command followed by a question mark is always helpful, a lot of commands can be "extended" on a single command line Ziv -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Mike Sent: Friday, February 06, 2009 6:08 AM To: [email protected] Subject: [c-nsp] setting source address for icmp messages Hello, I'm trying to learn how to get my 7204vxr to not send icmp messages with the source ip of interface the message is being sent out. I have a public ip on my loopback and thought this was what ios preferred if it exists? I have some other interfaces which have 10.x.x.x addresses and icmp messages like host unreachable and such are sourced from this which is undesirable due to inbound filtering at many sites at their gateways for rfc1918 and other bogon addresses. Am I being silly to want this or is there something I can do to get my way here? Tks. Mike- _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ ************************************************************************************ This footnote confirms that this email message has been scanned by PineApp Mail-SeCure for the presence of malicious code, vandals & computer viruses. ************************************************************************************ ************************************************************************************ This footnote confirms that this email message has been scanned by PineApp Mail-SeCure for the presence of malicious code, vandals & computer viruses. ************************************************************************************ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
