No. They are all handled by the same DNS server and there is no proxy server and wccp is disabled on that router.
On Tue, Feb 10, 2009 at 7:43 PM, Charles Klement <[email protected]> wrote: > do users on that subnet get handed a different DNS or proxy server ? > > On Tue, Feb 10, 2009 at 8:19 AM, Rocker Feller < > [email protected]> wrote: > >> No NAT these are all public ips. >> >> Router 2811 is the terminating point for all these ips which come in on >> vlans on different subinterfaces. >> >> Customers connect to me via this router and I have issued them public ips. >> >> This router is connected direct to my uplink (Internet) provider. >> >> Rocker >> >> >> >> On Tue, Feb 10, 2009 at 6:20 PM, Jay Hennigan <[email protected]> wrote: >> >> > Rocker Feller wrote: >> > >> >> Well am thinking its kind of an attack since its the whole network. >> >> >> >> Reason when I assign myself an ip on that range and check my ip address >> >> from >> >> what is my ip. >> >> >> >> It gives me the ip address of my cisco router. where that ip range is >> >> from. >> >> >> > >> > Is your Cisco router performing NAT? If so, this is normal. >> > >> > >> > -- >> > Jay Hennigan - CCIE #7880 - Network Engineering - [email protected] >> > Impulse Internet Service - http://www.impulse.net/ >> > Your local telephone and internet company - 805 884-6323 - WB6RDV >> > >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
