Maybe I'm just hitting my head against a wall and therefore can't see the answer..
I'm looking for a way to take a non-trunked ethernet port and encapsulate any of the L2 packets into a double-tagged dot1q vlan. Basically my provider gives me a single circuit with 802.1q and then tunnels vlans to different destinations (most likely via xconnects). At this (small) location I don't need to have all the vlans in use, just specific ones - so I'm looking for a way to do it without installing a 2nd switch in front of the cisco just to create the inner vlan tags, which is what all of cisco's documentation assumes. In psuedo IOS - what I'd like to do: ! interface FastEthernet 0/0 switchport access vlan 10 20 ! interface FastEthernet 0/1 switchport access vlan 50 60 ! interface FastEthernet 1/0 switchport mode trunk switchport trunk encapsulation dot1q switchport trunk allowed vlan 20,60 ! Is this possible at all? _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
