Hi, I work in an ISP environment and in it I found developed MPLS delivering ip vpns.
There is one client with 5 branches. All work fine except for 1. This is the scenario. The default route is derived from the corporate office (HQ). Its network range is 172.16.0.0/16 Say branch with problem is branch Z ip range is 172.16.7.0/24 >From Z Lan I can ping HQ Lan ok ping 172.16.1.1 source 172.16.7.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 172.16.1.1, timeout is 2 seconds: Packet sent with a source address of 172.16.7.1 !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 24/29/36 ms >From HQ I cannot ping Z apart from reaching the Z router.the lan ping 172.16.7.1 PING 172.16.7.1 (172.16.7.1) 56(84) bytes of data. 64 bytes from 172.16.7.1: icmp_seq=0 ttl=253 time=19.8 ms Any other connections are dropped from branch Z router A trace reveals packets are dropped from the main MPLS PE router. The PE router can reach the CE router but not any pc behind it. Your input appreciated Regards Rocker _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
